| Model |
UR100-2S-1.5B |
| Maximum Input DC Voltage |
450VDC |
| Recommended MPPT Voltage Range |
250~350VDC |
| Working DC voltage of Inverter |
120~450V |
| Max MPPT efficiency |
99% |
|
Grid or backup generator input |
| Input Voltage |
Single phase 220V(-15%~30%) |
| Input frequency |
50Hz (-5%~+5%) |
|
Output specification |
| Drive mode |
Variable Frequency Drive, output PMW, 3 phase |
| Rated output voltage |
3PH 220V |
| Applicable motor (kW) |
1.5kW |
| Rated output current (A) |
7.5A |
| Output frequency |
0~600.00Hz (Off 0~50.00Hz) |
| Protection |
Over-current , overvoltage, overheating |
| |
Output phase-lose |
| |
Under-load, under-voltage |
| |
Short circuit and etc |
| |
Dry run protection |
|
General Parameters |
| Power generated by PV panel |
Built-in |
| UP time of the pump |
Built-in |
| Full auto running |
Built-in |
| Over tank & dry run control |
Built-in |
| Application Site |
No direct sunshine, no dust, corrosive gas, combustible gas, oil mist, steam, dripping |
| Altitude |
0~2000m, derated use above 1000m; Per 100m, the rated output current decrease 1%. |
| Environment Temperature |
-10~40 (Environment Temperature be 40~50, derated use.) |
| Humidity |
5~95%,non-condensation |
| Vibration |
less than 5.9 m/s2 (0.6g) |
| Storage Temperature |
-20~+70 |
| Efficiency |
Rated Power Run ≥93% |
| Installation |
Wall mounted or flange installation |
| Protection Grade |
IP20 |
| Cooling |
Forced Air Cooling |
| Package Size* |
233*180*216 |
| VFD Size* |
110*173*137 |
| VFD Size & Weight |
Net weight: 1.47Kg, Gross weight: 1.11Kg |
| Special Feature |
Remote Monitoring System (if Required) |
| |
One Month Data Backup (via GPRS Data Logger) |
